頁面主標題

PP Tape Line Making Machine
PP Tape Line Making Machine
PP Tape Line Making Machine
TY-TLM Series
Feature & Advantages


TLM series is an economical design of extrusion tape line, and low power consumption produces high performance as the main feature.
TLM series is mainly used in PP, HDPE tape line production, it used for weaving by circular loom and flat loom into tubular woven bags, onion bags, FIBC fabrics, tents, and waterproof tarpaulin.


  • Double layer auto filter change and T-die thermal insulation design
  • Melt pump (optional), its function is to maintain the quality and stability of the extrusion
  • Quench take-up unit, with extrusion device, film cooling forming, and water removal system to keep the film even
  • PLC program control & HMI interface, easy to operate and data memorize
  • 5 sets slitting knife with swing device and non-stop design
  • Inverter type and automatic tension control winder, the light-weight design of the tape guide slide achieves power saving performance, and the winding shaft is equipped with a hooking device to facilitate the roll change
  • MAGUIRE blender(optional), and its function is to automatically cut and mix according to the proportion of raw material
Feature
Inverter type and automatic tension control winder
Inverter type and automatic tension control winder
5 Sets Slitting Knife
5 Sets Slitting Knife
PLC Program Control & HMI Interface
PLC Program Control & HMI Interface
Quench Take-up Unit
Quench Take-up Unit
Melt Pump (optional)
Melt Pump (optional)
Double Layer Filter Change and T-die Thermal  Insulation Design
Double Layer Filter Change and T-die Thermal Insulation Design
MAGUIRE Blender(optional)
MAGUIRE Blender(optional)
Specification
Itm/modelTY-TLM110-1100-180ST1TY-TLM-120-1300-216ST1TY-TLM130-1500-252ST1
Max. CAPACITY420KGF/HR520KGF/HR620KGF/HR
Max. Line Speed380 m / min380 m / min380 m / min
Denier500 - 1200500 - 1200500 - 1200
Screw Diameter / Multiple 110 mm / 34D 120 mm / 34D 130 mm / 34D
T-die Width1100 mm1300 mm1530 mm
Effective Width990 mm1190 mm1400 mm
Auto Tension Take-up Winder180 pcs216 pcs252 pcs
L x W x H39000 mm x 4700 mm x 4050 mm41000 mm x 4900 mm x 4150 mm43000 mm x 5100 mm x 4250 mm
Detailed introduction
*
TY-TLM SERIES
This equipment was design for special screw and dosing material,reduce the waste.high efficiency and high quality.Special design for take up roller and remove water equipment,high speed was dry.Non stop in slitter Six sets for Gravimetric Batch Bladers and move bar,extend the blade use time.Thinkness measurement system was optional equipment,it can keep the denier quality and stable,.HMI setting temperature and speed,PLC to controller.Automatic increased speed,Reduce,operational easy.
*
TY-TLM SERIES
This equipment was design for special screw and dosing material,reduce the waste.high efficiency and high quality.Special design for take up roller and remove water equipment,high speed was dry.No stop in slitter Six sets for Gravimetric Batch Bladers and move bar,extend the blade use time.Thinkness measurement system was optional equipment,it can keep the denier quality and stable,.HMI setting temperature and speed,PLC to controller.Automatic increased speed,Reduce,operational easy.
TERNG YIH MACHINERY CO., LTD